Dorus43 pagina

Onderwerpen lijst
Nieuwe reactie


INSTALL SKYSTAR 19-03-10 12:33
u can find the driver in

download v4l-dvb from this link:

1-) extract the two archives
2-) and copy:
from the: soft_1721_6430.bz2 folder to --- v4l-dvb0276304b76b9 folder

3-) cd v4l-dvb-0276304b76b9/

4-)in the terminal excute

command 1
#patch -p1 < skystar2-rev2.8-v4l-dvb.patch

commnad 2
# cp cx24113_blob.o.x86-64 v4l/cx24113_blob.o_shipped * for 64-bit *
# cp cx24113_blob.o.i386 v4l/cx24113_blob.o_shipped * for 32-bit *

5-) excute command:
sudo make install
sudo reboot.

Gratis je eigen forum
19-03-10 17:29
ust so happens I am installing this card right now, alot of the page you linked to is scripts and commands and not that much stuff to translate... lucky for you I'm bilingual

Installing Skystar2 and Xine on Ubuntu kernel 2.6.8

Load the Modules
modprobe budget
modprobe stv0299

So the modules load at boot-time they have to be added to /etc/modules.

Create the following script in /etc/init.d and name it dvb
use vi, emacs or nano or whatever editor you prefer

nano /etc/init.d/dvb
# get rid of old DVB API devices; do it twice for good measure...

rm -rf /dev/ost
rm -rf /dev/ost
rm -rf /dev/dvb
rm -rf /dev/dvb

#for major and minor devicenumber see here
#vi /usr/src/linux/Documentation/devices.txt

cd /dev
mkdir dvb
chmod 755 /dev/dvb
cd dvb
mkdir adapter0
cd adapter0
mknod -m 0660 frontend0 c 212 3
mknod -m 0660 demux0 c 212 4
mknod -m 0660 dvr0 c 212 5
mknod -m 0660 ca0 c 212 6
chown root.video /dev/dvb/adapter0/*''
chmod 744 /etc/init.d/dvb

Now add this to the runlevels

update-rc.d dvb defaults

Thraxes Comments: This takes care of the driver installation. The modules needed are preinstalled by default, all this just did was activate them and set up the devices in /dev. If you have perhaps streamlined your Kernel and thrown out exess baggage like Video for Linux you will need to recompile with the correct modules. These are in the DVB for Linux section of menuconfig and for the Skystar involve B2C2, budget cards and the stv0299 frontend - all as modules.

Installing Xine and dvb-utils

sudo apt-get install xine-ui dvb-utils

First thing to do is make a programme table that XINE can use. This will be called channels.conf and should normally be created in ~/.xine/. Included in DVB-Utils is a tool called scan that will create this file for you. IIRC scan works like this but better check the help before you try! UPDATE: I checked and this is actually how to do it: You need the initialization data so scan knows which frequencies to scan. This initialization data can be downloaded at linuxtv.org. They are included in the dvb apps and have listings for DVB-C, DVB-S and DVB-T. No need to compile the proggies as we have already installed them with apt-get but these initialization files are very important to make a channels.conf. Execute this command in the directory with the initialization files (I put them in /usr/bin/dvb)

scan -o zap path/to/initialization > /path/to/channels.conf

This should usually be in your home directory.
Now let's start up Xine! [ALT]+[F2]

xine dvb://

Channels can be changed on the Numpad. If xine doesn't work, you can try to manually tune the dvb card with szap (also included in dvb-utils)

zcat /usr/share/doc/dvb-utils/examples/channels.conf-dvbs-astra.gz > channel
szap -c channel -n 1 -r

You should now see some output scroll by, if you can see FE_HAS_LOCK then all is well and the card is tuned to a TV-programme.

Now open a second terminal and call up xine and tell it to use the cards current output that we enabled with szap.

xine stdin:// < /dev/dvb/adapter0/dvr0

Hope this helps. I'm actually working on not watching the DVB card locally but streaming the DVB Stream with VLC over a network so I can't really say anything about xine and it's problems. I can confirm however that the hardware installation described here works - at least for me it did.

Grub aanpass
20-03-10 09:10
start ubuntu.

Edit deze file "menu.lst"
te vinden op /boot/grub/menu.lst
Terminalcommando is: sudo gedit /boot/grub/menu.lst

Als het goed is zie je in die lijst ergens "default 0" staan.
Daaronder staat "timeout 10" = het aantal seconden dat ie wacht voordat de default wordt opgestart (in dit geval ubunutu (default is immers 0)

scroll nu naar beneden totdat je dit ziet

## ## End Default Options ##

title Ubuntu, kernel 2.6.12-10-386
root (hd0,2)
kernel /boot/vmlinuz-2.6.12-10-386 root=/dev/hda3 ro quiet splash
initrd /boot/initrd.img-2.6.12-10-386

title Ubuntu, kernel 2.6.12-10-386 (recovery mode)
root (hd0,2)
kernel /boot/vmlinuz-2.6.12-10-386 root=/dev/hda3 ro single
initrd /boot/initrd.img-2.6.12-10-386

title Ubuntu, memtest86+
root (hd0,2)
kernel /boot/memtest86+.bin


# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda2
title Microsoft Windows XP Professional
root (hd0,1)
chainloader +1

Tel nu het aantal "title" in deze kolommen in dit geval zijn het er 5
zie hieronder een samenvatting...

title Ubuntu, kernel 2.6.12-10-386
title Ubuntu, kernel 2.6.12-10-386 (recovery mode)
title Ubuntu, memtest86+
title Other operating systems:
title Microsoft Windows XP Professional

door nu de default bovenaan te veranderen in "default 4"
(tellend vanaf 0 t/m4 = 5) zal Microsoft windows XP Prof. hier in dit voorbeeld als default waarde opstarten (na 10 seconden).

maw je hoeft alleen de default waarde te veranderen.

install library
20-03-10 15:21
Can anyone explain me how to install nucurses library ?
It's library for doing "terminal graphics programming" with C or C++. ( just like "Graphics.h" on windows tarbo C ).
I got this library from http://mirrors.kernel.org/gnu/ncurses/
Open a Terminal from the menu Applications->Accessories->Terminal and type:

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install ncurses-dev

give your user password when requested, you don't see nothing when you type it, then press enter.

tijdelijk fout
20-03-10 15:48
make[2]: Entering directory `/usr/src/linux-headers-2.6.31-20-generic'
make -f /lib/modules/2.6.31-20-generic/build/scripts/Makefile.build obj=scripts/kconfig hostprogs-y=mconf scripts/kconfig/mconf
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
*** Install ncurses (ncurses-devel) and try again.
make[3]: *** [scripts/kconfig/dochecklxdialog] Error 1
make[2]: *** [v4l-mconf] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.31-20-generic'
make[1]: *** [/lib/modules/2.6.31-20-generic/build/scripts/kconfig/mconf] Fout 2
make[1]: Map '/home/dorus/tijde/v4l-dvb-0276304b76b9/v4l' wordt verlaten
make: *** [menuconfig] Fout 2

Install ncurses (ncurses-devel) and try again

21-03-10 09:46
dpkg -s packagenaam

dorus@dorus-desktop:~$ dpkg -s ruby

usbstick ext2
22-04-10 10:04
dorus@dorus-desktop:~$ sudo fdisk -l
[sudo] password for dorus:

Schijf /dev/sdc: 3997 MB, 3997171712 bytes
255 koppen, 63 sectoren/spoor, 485 cilinders
Eenheid = cilinders van 16065 * 512 = 8225280 bytes
Schijf-ID: 0x000b9a92

Apparaat Opstart Begin Einde Blokken ID Systeem
/dev/sdc1 1 485 3895731 b W95 FAT32

dorus@dorus-desktop:~$ sudo mke2fs /dev/sdc
mke2fs 1.41.9 (22-Aug-2009)
/dev/sdc is het hele apparaat, niet slechts een partitie!
Toch doorgaan? (j,n) j
Soort besturingssysteem: Linux
Blokgrootte=4096 (log=2)
Fragmentgrootte=4096 (log=2)
244320 inodes, 975872 blokken
48793 blokken (5.00%) gereserveerd voor systeembeheer
Eerste gegevensblok=0
Maximum aantal bestandssysteemblokken=1002438656
30 blokgroepen
32768 blokken per groep, 32768 fragmenten per groep
8144 inodes per groep
Superblokreservekopieën opgeslagen in blokken:
32768, 98304, 163840, 229376, 294912, 819200, 884736

Schrijven van inodetabellen: voltooid
Schrijven van superblokken en bestandssysteem-metagegevens: voltooid

Ubuntu 9.10 en
Woonplaats: geen geluid
27-05-10 17:42

Woonplaats: v4l-dvb-skystar2-rev28
27-05-10 19:49
http://www.linuxtv.org/wiki/index.php/TechniSat_SkyStar_2_TV_PCI_/_Sky2PC_PCI#Technisat_SkyStar_2_TV_PCI_with_FlexCo pIII_Rev_2.8

Manuelle Installation (ab rev. 2.7) (ab Kernel 2.6.25

install source
Woonplaats: install source files
30-05-10 08:01
sudo make install
clean install

For all those who are beginners in any linux(ubuntu) find hard to find the package files of their distro and end up in finding an source package(which is either in tar.gz or .gz).. so now people think how to install these source files…..

lets now see how would you be installing source files in ubuntu…..

source files contain the programs and hence before the installation you need to compile them… so you need to install the build-essentials from the synaptic package manager…. else this build-essentials is already present in the cd.. and so you can install it…..else you can install it typing it in the terminal by

sudo aptitude install build-essential

suppose you have a source file name src.tar.gz, what you do initially is that you need to extract the source files and then in the terminal….

navigate to the folder where the source file is extracted using the cd commands….. and then

type the following…


sudo make install

clean install

lets see what each one of them does…

./configure….. checks whether the required dependencies are available on your system or not….. if not an error is reported….

make compiles the source code and make install is used to install the program in to the location

if it asks for an installation location it is recommended to install all the source to /usr/src

clean install removes any temporary files created in the installation process of the source

and thats it your source file in installed in your system.

Add to PATH
Woonplaats: Adding to the Path
30-05-10 08:42

om /data/myscripts bij te voegen

export PATH

User Class
Script to modify
One user
All users except root


Onderwerpen lijst
Nieuwe reactie